BM Revolution 77" Cutter

Bent Axis Piston Motor
97% efficiency rating up to 6000 PSI
1200 RPM @ MAX GPM
Can withstand up to 40 micron contamination

Shaft diameter: 3.625"
30,000 PSI Column pressure rated
43,000 PSI Side Load pressure rated
Large oil capacity to keep down heat.
Locking Pin to secure shaft if bearing failure should occur.

DualPlate Design
Three Hardox450 Blades, 40% more wear resistant than AR400
-1/2" Thick
-18" long
- 6" wide
Twelve 1 1/8" concave mulching teeth
Two 1/2" plates welded together in a stronger layered design.
Easy blade change with access through top of deck.

Cuts Stumps Off Even with the ground
Open Front Push Bar Design
- Easier access to larger trees
-Cleaner finish cut on grass and small trees
Pointed deck corners for selective cutting
Sloped side push bar to cut closer to leaning trees, guy wires, etc
Low angle quick attach
-allows an 85% roll up to cut overhanging limbs
-smaller footprint for more maneuverability in tight areas