BM Revolution Axe Cutter

Bent Axis Piston Motor
98% efficiency rating up to 5,700 PSI
1300 RPM @ MAX GPM
Can withstand up to 40 micron contamination

Shaft diameter: 3.625"
30,000 PSI Column pressure rated
43,000 PSI Side Load pressure rated
Large oil capacity to keep down heat.
Locking Pin to secure shaft if bearing failure should occur.

Stacked Plate Design
Four Hardox450 Blades (40% more wear resistant than AR400)
-3/4" Thick
-19" Long
- 6" Wide
Sixteen 1 1/8" concave mulching teeth
Two 100KSI 1/2" plates with additional 1/2" brace ring around the perimeter of lower plate.
Almost 3x stronger than standard steel.
Easy blade change with access through top of deck

Cuts stumps off even with the ground
Open Front Push Bar Design
- Easier access to larger trees
- Cleaner finish cut on grass and small trees
Pointed deck corners for selective cutting
Sloped side push bar to cut closer to leaning trees, guy wires, etc
Low angle quick attach
-allows an 85% roll up to cut overhanging limbs
-smaller footprint for more maneuverability in tight areas